Scolmore Group Sites

Click

Click

Ovia UK

Ovia UK

Unicrimp

Unicrimp

Click Smart +

Click Smart +

Scolmore OEM

Scolmore OEM

Scolmore Middle East

Scolmore Middle East

Sangamo

Sangamo

IEC Lock

IEC Lock

Click Litehouse

Click Litehouse

Espire

Espire

Ovia Ireland

Ovia Ireland

ESP Ireland

ESP Ireland

Elucian

Elucian


Product Finder
Marketing Hub
Scolmore Sites
2025 | ESP (Elite Security Products) Ltd.
Part of the Scolmore Group. All rights reserved.

3W Hinged Bulkhead Meets Compliance

3W Hinged Bulkhead Meets Compliance

Test Data Independently Verified By The LIA

Following a successful launch and the increase in demand, the IP65 maintained emergency hinged lid bulkhead has recently undergone additional independent verification testing by The LIA (Lighting Industry Association).

The luminaire is already third party approved by CTS to BS EN 60598 Part 2-22: 2014: (Particular requirements - Luminaires for emergency lighting).

BS EN 13032-4:2015: Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. LED lamps, modules and luminaires.

The LIA conducted product performance testing to BS EN 13032-4:2015, confirming the colour rendering and lumen outputs in both mains and emergency modes providing photometric data ready for lighting design software.

In addition to the testing above, the LIA conducted an emergency duration discharge test with which the luminaire achieved the 3 hours minimum duration required from a full charge.

The hinged lid of the 3W LED bulkhead aids installation whilst offering a colour temperature of 5500K and mains light output of 151 lumens and 107 lumens during emergency mode. The luminaire is supplied complete with legends and compact 3.6V 900mAh NI-CAD battery.